Monday, November 22, 2010

eBeam Edge V's eBeam Classic

We just got our demo kit of Luidia eBeam Edge systems here at our office. You can probably guess were were a little excited to get our hands on this piece of technology.

So what's the difference between the new edge and the original eBeam? There are two answers - not much and quite a lot.

Not much: The software is the same for the ebeam classic - it has recently had an upgrade with more gallery content and a wide range of templates to use.
The essentials are still the same - the eBeam edge converts your standard whiteboard into an interactive whiteboard, it is even magnetic so it is a breeze to install onto a whiteboard already in your classroom.

Quite a lot.

As the above photos show there is a definite height difference and the pen is smaller for the edge (not interchangeable). This means that it "seems" more accurate (they are both rated at the same 1.1mm for accuracy).

The edge also has a cool "calibrate" button on the unit for quick calibration without heading back to the computer.

The edge also lives on the edge so therefore takes up less space on the board even though length wise they are pretty much the same. Because of its' height off the board the edge can comfortably sit under the hinge of a swing board - meaning it won't get crushed (unless you are using piano hinges).


Recommendation: At around $150 more than the classic eBeam (which will still be sold) the Edge is not that much more, but when you put into volume terms, by choosing the classic version for 10 classrooms you are saving a large chunk of change.

But I really like the new pen and the small form factor of the Edge and I would probably choose it over the classic on a 1:1 match up.




2 comments:

www.arduino.com.mx said...

Any luck on finding a good provider for replacement pen in the classic. Lost 3 pens, any recomendations?

Hall Jackson said...

Rizzo Comercial in Guadalupe are the suppliers in Mexico.

alternatively go to

http://www.e-beam.com/nc/partners/international-distributors.html

to find a distributor near you.

I'm not allowed to sell you one from Australia- and it would probably cost more anyway.